|
Last updated 09/05/2008
VAT Registration No 929 4294 88 |
|
NEW OneShot Flattening Paste!
New From those very useful Oneshot people this additive which you mix with Oneshot Enamels to remove the shine to produce the popular semi matt or matt finish.
Add at a ratio of 1;1
Size 1 USA Quart
Please note this item also may not travel by air Please email us for ship cost outside UK
Oneshot 4005 Speed Dry UV Clear Coat These items have flammable status and must be shipped by surface mail ! LIMITATIONS: Lifting or wrinkling should not occur when used as a topcoat over other 1 Shot enamels, after a minimum of 24 hours drying time; however, we suggest waiting 72 hours when possible, or adding 1 Shot 4007 Hardener to your paint project, in anticipation of top coating. APPLICATION: Brush, Foam or Spray. MIXING: Stir thoroughly. Strain prior to spray application. DRYING: Normally dust-free in 30 to 60 minutes, although longer times in high-humidity environments are not unusual. Recoat in two hours. CLEANUP: Clean application equipment with 1 Shot Brush Conditioner and Cleaner. SAFETY: This, and all 1 Shot and Chromatic products, are intended for professional use. It is not intended to be used in or around residential households. See Warning and Caution statements on label. For health and safety considerations, consult the current Material Safety Data Sheet for this product.
£
6.95
Marsons "Smoothie" 2 oz
Please note this item also may not travel by air MSDS Data sheet available on request
According to Herb Martinez ... "It will hold out the color longer and gives your paint 35% faster drying and adhesion. It also makes 1 Shot a viable alternative to House of Kolor urethanes for outlining and clearing over with any type of clear (except acrylic lacquer)"............... This product is designed to accelerate drying time for all Oneshot lettering enamels. Oneshot Hardener will improve adhesion to most surfaces, as well as extend colour life and increase gloss. Also will aid in preventing lifting when an automotive clear coat is applied over the paint. Use for lettering, striping, or coating out various substrates when drying time needs to be accelerated. The way to use this substance is by adding up to 10% by volume of Oneshot Hardener to paint. Add hardener before using any reducers, Thinning with a reducer should not be necessary. If thinning is required, thin with Oneshot LOW TEMP reducer only. Avoid using Oneshot Hardener under humid conditions. Do not use under Acrylic Lacquer. Clean Equipment promptly with Oneshot Brush Cleaner
This product is designed for cleaning your brushes which have been used with oil
based paints. It is excellent for reconditioning, softening and renewing
hardened natural and nylon brushes and has been specifically formulated not to
interfere with the properties of oil based paints
This high quality reducer is full of extra additives that assist in good adhesion to your surfaces.
The Low Temp Reducer is formulated to improve flow and levelling at low temperatures by reducing the viscosity and accelerating the evaporation rate without significantly altering the quality of the coating being reduced, can also be used as a thinner for spray applications.
The High Temp Reducer is formulated to improve flow and levelling
at high temperatures by reducing the viscosity and slowing down the evaporation
rate without significantly altering the quality of the coating being reduced.
|